Pump (drain pump) - It would seem, what relation does this part have to water filling? If you take old washing machines - then nothing, but in washing machines where there is an Arcadia or EVO-2 control module, if the pump is faulty, the brains will immediately see this breakdown and will not start washing
Pressure switch or water level sensor - Rarely, but it happens that the contacts inside it stick, as a result, an incorrect signal is formed, as a result, there is no water filling. At the moment, Indesit washing machines with an electronic water level sensor are increasingly common, I must say, this is rare crap, it is expensive, and there is no reliability and it is very difficult to check it to find out its functionality, it is advisable to replace it with a known working one.
Control module - I won't even say anything about this, at the beginning canada telegram data of this article, I already said that it cannot be repaired from the photo
In my opinion, I have listed all the main faults related to water inlet, the only thing that can be added is that first of all you need to check the water supply, to do this, unscrew the inlet hose from the washing machine, lower it into the basin and turn on the water. You also need to check the filter, which is in the valve body. Very often this mesh gets clogged, it is pulled out with pliers, you just need to hook the tongue and pull it towards you. I think that's it, as far as filling the water into the washing machine is concerned, I have listed it. Now let's talk about other faults.
We discussed the topic of water inlet above, now let's move on to the main faults that are inherent not only to the Indesit brand, but also to other washing machines. First, you need to visit the page where you can see the error codes of Indesit washing machines, I assure you, this will greatly help in repairs and, most importantly, in diagnosing faults. Well, now let's go over those faults that you can fix yourself.