Repair of the raster bushing and impact bolt

shapanwwuom · Post by **shapanwwuom** » Tue Feb 18, 2025 7:10 am

Replacing the cartridge
To replace a cartridge that has exhausted its resource, first of all it is necessary to consider which company produced this product. The whole point is that the cartridge fastening schemes of different manufacturers have their own characteristics.

Replacing a chuck on a rotary hammer

For example, to remove the chuck in a Bosch hammer drill, you need to do the following: loosen the locking ring, pull out the chuck and install a new one in its place.

Repair of a drunken bearing
In some models of this tool, the impact is exerted by means of a drunken bearing. With intensive use, it may be subject to destruction.

To repair it, you will need a flat-head screwdriver. After australia telegram data disassembling the housing, the bearing must be removed from the housing, disassembled, worn parts replaced, and installed in place.

To repair the hammer drill's impact mechanism, it is necessary to remove the raster bushing, for this it is necessary to release the spring and the locking ring. After this, the impact bolt is replaced with a new one, or sent for restoration.

Replacing the sleeve
The sleeve fails quite rarely. To replace it, the old one must be removed from the aluminum body and a new one installed in its place.

How to repair a hammer drill yourself? + video
Anyone who has ever worked with a hammer drill knows how difficult its operating conditions are. That is why DIY hammer drill repair is such a popular request on the Internet. And today we will tell you absolutely everything about repairing this tool.

What do you need to know about hammer drill repair?
Undoubtedly, the owners of such expensive equipment want their devices to be of high quality and perform their work 100%. First of all, the correct use of the tool will protect you from serious breakdowns, which we will talk about a little later. And, of course, timely repair of the device. At the same time, any small failure should already become a reason for concern and preparation for repair.